Polished concrete is quick changing into the ultimate no-wax flooring material. Due to recent advances in polishing equipment and techniques, contractors are now grinding concrete floor surfaces, whether or not new or recent to a high-gloss finish that never needs waxes or coatings. Polished concrete floor appearance like polished stone floor and it’s highly durable. Additionally, polished concrete is ornamental, practical an . Polished concrete could be a mechanical grinding and sprucing process that utilizes industrial diamonds and hardeners to level, densify, polish and finally seal the ground from within the inside of the floor surface.

Coat well, however do not create puddles. The colour can deepen with the second coat. Coatings are the materials which is use to hide up the surface to preserve from rust and to reinforce the attractiveness. Made from paint and extra additives, coatings are tremendously used for inner and outer beautification of house.

Clean any glue, grease, tape or different objects off the concrete. Apply solvent or a stripping agent if needed; use a stripping agent that mixes with water. Clean the surface employing a soap and water, followed by a pressure washer rinse. This can give a superior concrete surface that is ideal for staining. Cleaning and re-sealing of all concrete surfaces should be done on a daily basis. The frequency will depend on the number of, traffic from cars, foot-ware, water exposure, UV rays and any chemicals the concrete surface may be exposed to.

Painting concrete floors is not a permanent solution, and it will touch upon and chip over time. The other is true with stained concrete floors, once you apply the stain whatever result you get is permanent. Painting, home or industrial building has now become a piece of art. The stress isn’t simply to color the walls however to make a stunning ambience.

Abide By These Tips When Buying Unique Staining Concrete is a post from: How To Stain Concrete

I am the owner and GC of a new construction house and garage in a rural part
of Central Texas (Hico, TX) to have stained, sealed, and possibly waxed
concrete flooring.

Cleaning the floor with a floor machine and pressure washer and should acid
stain the floors next week.

Background Info:
3050 sq ft total (house and garage).  Slick concrete burned finish.
4 ft diamond pattern cut 1/4 inch wide 1/16 deep with border.
Rural 75 acre cattle and goat farm with sand always tracked into house.
Malay Tan Kemiko stain has been performed on sample area. House is framed and roofed and ready to be insulated and sheet rocked.
Performed successful 2′x2′ plastic sheet water test on slab.
Temp in Central Texas is typical about 45 to 70 degrees average now.

I corresponded with Lindy Ausburne who recommended using 100% solids epoxy.
(150 sq ft/gal -21 gallons of their BC125 Epoxy) single coat without primer.
Lindy did not suggest using two coats of less than 100% solids that have a
longer pot life than the typical 20 – 30 min for 100% solids.

1) Could you guess at the approximate minimum cost to get a good
subcontractor to put on the epoxy?  One coat of 21 gallons.
2) Looks like it will take two people if I have to do the epoxy coating, but
Sherwin Williams said I need 3 people to mix, squeegee, and roll this amount
as a continuous application.  SW also do not recommend a single coating of
100% epoxy and recommended a seal epoxy coat and a final 100% coating.  They
gave me a 50% change of success with a single coat.
3) If I have to put the sealer and finish coat on with a single person do
you have any suggestions that would be durable in this abrasive environment.
4) Will a Kemico Malay Tan Wax be transparent enough to use for a wear coat?
5) Is there a better solution to the sealer/finish coat for this
application?

I sincerely appreciate any suggestions you can offer me on this project.

A. First off in your environment I surely wouldn’t use an epoxy as a sealer for your floor unless you put two coats of aliphatic urethane over the epoxy and then several coats of floor finish, preferably 22-25% solids.
If you are in a sandy environment I don’t care what you use its going to scratch. The floor finish is a sacrificial lamb for the sealer nothing more.
Unless you are using the epoxy to get that depth of field look that it gives that no other sealer can I would go with one coat of 22% solids solvent sealer for a good bond to that highly burnished concrete you mentioned followed with a coat of 30% solids solvent sealer and three to four thin coats of a high quality floor finish or polish. This is going to save you a ton of money and last just as long provided you maintain the floor maintenance schedule. Wear respirators for sure!!

This would include mats at all your doors and cleaned regularly, regular dust mopping and an occasional damp mop with a neutral cleaner such a Zep neutral cleaner available at Home Depot or Johnson’s Citrus neutral available at Lowe’s.
Don’t even bother with the Kemiko wax, it’s a maintenance nightmare, especially in your environment.
If you have very burnished concrete be prepared for the Kemiko stain to not take very well. All in all in my opinion its not a very powerful stain. You may want to try it straight on the second application if it doesn’t take well. Just my experience with it, that’s why I don’t use it or recommend it. Too pricey.

Epoxy Sealer for Concrete Stained Floor is a post from: How To Stain Concrete

So how does one keep the grout free from being a breeding place for bacteria or prevent it from getting dirty all too often? But, there are way and means to keep your grout free from incubating bacteria and prevent it from getting dirty so frequently. You can have the desired results by just sealing the grout. You may hire a professional for doing it or may even do it yourself. By putting on a grout sealer spray, you not only make it convenient to maintain clean tiles, but also create better sanitary conditions in your home.

Tile and grout cleaning is a very laborious and tiring job. The easiest way is to get them cleaned from a professional. If you are keen DIY enthusiast, here is how you may proceed with the project.

The first step is to rinse the tiles with a mixture of vinegar and water. In most of the cases it may suffice to do just that. The next step is to make a paste of baking soda and salt in equal proportion with just the right volume of water to have a paste. That is your grout cleaning mix. Clean the grout thoroughly with a soft scrubber or a toothbrush. Rinse with water or a wet sponge and then dry thoroughly with a towel.

Stained tile may be treated with lemon juice or bleach to restore the normal white color of the grout. Have patience to let the juice soak in for ten to fifteen minutes before wiping it off. It’s very important that you dilute the bleach and never add any other chemical to that. Take the necessary precaution of wearing gloves and glasses while handling chemicals.

The other ways of best grout cleaning involve the use of steam cleaner or pressure washer . Steam cleaners are generally used for interiors whereas for outdoors a pressure washer is often used. Both the tools give very good results.

Use a Grout Sealer and Avoid Frequent Cleaning of White Grout is a post from: How To Stain Concrete